Hard Drives: Ata versus Sata
The operation of computer systems has been steadily expanding as faster processors, memory, and video cards are continuously being developed. The one key component that is often neglected when finding at enhancing the operation of a computer principles is the hard drive. Hard drive manufacturers have been constantly evolving the basic hard drive used in modern computer systems for the last 25 years, and the last few years have seen some intriguing developments from faster spindle speeds, larger caches, great reliability, and increased data transmission speeds.
Western Hard Drive
The drive type used most in consumer grade computers is the hearty Ata type drive (commonly called an Ide drive). The Ata accepted dates back to 1986 and is based on a 16-bit parallel interface has undergone many evolutions since its introduction to growth the speed and size of the drives that it can support. The newest accepted is Ata-7 (first introduced in 2001 by the T13 Technical Committee (the group responsible for the Ata standard)) which supports data transfer rates up to 133Mb/sec. This is imaginable to be the last modernize for the parallel Ata standard.
As long ago as 2000 it was seen that the parallel Ata accepted was maxing out its limitations as to what it could handle. With data rates hitting the 133Mb/sec mark on a parallel cable, you are intriguing all sorts of problems because of signal timing, Emi (electromagnetic interference) and other data integrity issues; thus business leaders got together and came up with a new accepted known as Serial Ata (Sata). Sata has only been nearby a few years, but is destined to come to be "the standard" due to any benefits to be addressed in this Tech Tip.
The two technologies that we will be finding at are:
Ata (Advanced Technology Attachment) - a 16-bit parallel interface used for controlling computer drives. Introduced in 1986, it has undergone many evolutions in the last 18+ years, with the newest version being called Ata-7. Wherever an item is referred to as being an Ata device, it is ordinarily a Parallel Ata device. Ata devices are also ordinarily called Ide, Eide, Ultra-Ata, Ultra-Dma, Atapi, Pata, etc. (each of these acronyms verily do refer to very specific items, but are ordinarily interchanged)
Sata (Serial industrialized Technology Attachment) - a 1-bit serial evolution of the Parallel Ata bodily warehouse interface.
Basic Features & Connections
Sata drives are easy to distinguish from their Ata cousins by the different data and Power connections found on the back of the drives. A side-by-side comparison of the two interfaces can be seen in this Pdf from Maxtor, and the following covers many of the differences...
Standard Ata drives, such as this 200Gb Western Digital model, have somewhat bulky, two inch wide ribbon cable with 40-pin data connections and receive the 5V vital to Power them from the well-known 4-pin connection. The basic data cables for these drives have looked the same for years. A turn was made with the introduction of the Ata-5 accepted to great heighten the signal ability by production an 80 wire cable used on the 40-pin connector (these are ordinarily called 40-pin/80-wire cables). To heighten airflow within the computer principles some manufacturers resorted to verily folding over the ribbon cable and taping it into that position. Other recent bodily turn also came with the arrival of rounded cables. The operation of the rounded cables is equal to that of the flat ribbon, but many prefer the improved principles air flow afforded, ease of wire management, and cooler appearance that come with them.
Sata drives, such as this 120Gb Western Digital model, have a half inch wide, 7 "blade and beam" data connection, which results in a much thinner and easier to administrate data cable. These cables take the convenience of the Ata rounded cables to the next level by being even narrower, more flexible and capable of being longer without fear of data loss. Sata cables have a maximum distance of 1 meter (39.37 inches), which is much greater than the recommended 18 inch cable for Ata drives. The reduced footprint of Sata data connections frees up space on motherboards, potentially allowing for more convenient layouts and room for more onboard features!
A 15-pin Power relationship delivers the 250mV of vital power to Sata drives. 15-pins for a Sata expedient sounds like it would require a much larger power cable than a 4-pin Ata device, but in reality the two power connectors are just about the same height. For the time being, many Sata drives are also arrival with a heritage 4-pin power connector for convenience.
Many modern motherboards, such as this Chaintech motherboard, come with Sata drive connections onboard (many also together with the Ata connectors as well for heritage drive compatibility), and new power supplies, such as this Ultra X-Connect, ordinarily highLight a few of the vital 15-pin power connections, production it easy to use these drives on new systems. Older systems can verily be upgraded to reserve Sata drives by use of Adapters, such as this Pci slot Sata controller and this 4-pin to 15-pin Sata power Adapter.
Optical drives are also becoming more facilely available with Sata connections. Drives such as the Plextor Px-712Sa take advantage of the new interface, although the operation will not be any greater than a comparable optical drive with an Ata connection.
Performance
In expanding to being more convenient to setup and drawing less power, Sata drives have operation benefits that verily set them apart from Ata drives.
The most intriguing operation highLight of Sata is the maximum bandwidth possible. As we have noted, the evolution of Ata drives has seen the data transfer rate reach its maximum at 133 Mb/second, where the current Sata accepted provides data transfers of up to 150 Mb/second. The thorough operation growth of Sata over Ata can currently be imaginable to be up to 5% (according to Seagate), but improvements in Sata technology will verily heighten on that.
The time to come of Sata holds great things for those wanting even more speed, as drives with 300 Mb/second transfer rates (Sata Ii) will be facilely available in 2005, and by 2008 speeds of up to 600 Mb/second can be expected. Those speeds are incredible, and are hard to imagine at this point.
Another operation advantage found on Sata drives is their built-in hot-swap capabilities. Sata drives can be brought on and offline without shutting down the computer system, providing a serious advantage to those who can't afford downtime, or who want to Move drives in and out of operation quickly. The higher whole of wires in the power relationship is partially explained by this, as six of the fifteen wires are dedicated to allowing the hot-swap feature.
Price
Comparing Ata drives to Sata drives can be tricky given all of the variables, but in general it is the case that Sata drives will still cost just a bit more than a comparable Ata drive. The gap is closing rapidly though, and as Sata drives gain in popularity and availability a positive shift in prices can be expected. considering the benefits of Sata over Ata, the possible inequity of a few dollars can verily be justified when considering an upgrade. Computer Geeks currently has a small option of Sata drives, but any technical sites, such as The Tech Zone and The Tech Lounge, offer real time price guides to see how comparable drives stack up.
Final Words
The current Sata accepted provides vital benefits over Ata in terms of convenience, power consumption and, most importantly, performance. The main thing Ata has going for it right now is history, as it has been the accepted for so long that it will not likely disappear any time soon. The time to come of Sata will be even more intriguing as speed increases will help hard drive amelioration keep pace with other key principles components.
Ata vs SataSee Also : Buy Shopping Discount Belkin N1 Vision Wireless Router
No comments:
Post a Comment